There's a lot of discussion about which varnish is the best for painted miniatures, especially when you plan on playing with the miniature. Gloss varnishes are considered better than matte ones because the gloss finish is more durable. But many gamers dislike shiny miniatures and prefer a matte finish. Professional miniature painters always try to avoid shiny finishes so that their paint job isn't obscured. Matte varnishes are also the most common.
- Krylon - $1.49 per can
- Citadel Colour Matte Varnish - $7.99 per can
- Armory's Matte Sealer - $5.95 per can
- Testors Lusterless - $4.29 per can
- Testors Gloss - $4.29 per can
- Krylon - $.14 per ounce
- Citadel Colour Matte Varnish - $.73 per ounce
- Armory's Matte Sealer - $.50 per ounce
- Testors Lusterless - $1.63 per ounce
- Testors Gloss - $1.63 per ounce
Here's a review of the major matte varnishes used for gaming miniatures. I painted six GW Bretonnian archers exactly the same and varnished each with a different product. The first archer hasn't been sprayed at all. The other five were heavily sprayed twice each with: Krylon Matte Varnish, Citadel Colour Matte Varnish, Armory Matte Sealer, Testors Model Master Lusterless Flat Lacquer Overcoat, and a gloss varnish that I think is Testors Gloss Lacquer. The reason why I sprayed one with gloss is just to show how it compares to the rest. Testors produces a wide variety of varnishes, including one called Dullcote, which is popular among professional painters.
You can click here for a larger image.
- The unvarnished archer as an example.
- Krylon - I normally use this. It produces a fairly dull finish with only one coat, but when I did two thick coats, it became quite shiny. Krylon had the least offensive fumes.
- Citadel Colour Matte Varnish - This warns not to apply it too thickly because it can become shiny, but it was very dull after two heavy coats. About the only thing I could criticize about the Citadel product is the price.
- Armory's Matte Sealer - This is about as shiny as Krylon, for a much higher price. It also had the most obnoxious fumes, even a couple minutes after spraying.
- Testors Lusterless - This is a remarkably dull coat, without affecting the colors. It's even a little duller than the original unvarnished one all the way to the left!
- Testors Gloss - This is extremely shiny, to the point that the miniature looks wet. Of course it's supposed to do that.
The Runner-up: Krylon Matte Varnish. In my opinion, if you want a reliable, matte finish for rank-and-file troops, nothing is as inexpensive as one coat of Krylon Matte Varnish. If you must have the flatest finish possible though, Testors is the way to go.
What To Avoid: Armory's Matte Sealer. This product is expensive, produces horrible fumes and the finish is shiny.
I've bought a lot of Crafts Etc. products from Hobby Lobby, Michaels and other craft stores. When I looked this up on the web I recognized the can. I remember using it once, but I don't know how well it worked. Their website says it's no longer available."Hello,
Someone posted your article on the Avalon Hill Axis & Allies site. I thought you might want to consider another candidate that in my opinion beats them all, ounce per ounce, penny per penny. "Crafts Etc" clear acrylic matte coating.
It dries in a heartbeat, can be applied thickly or thinly, and odor is no problem. $4.47 for 11 oz can.
Jim (aka panzerpainter)"
A can costs $5.49 for 11 ounces. That's $.50 per ounce, which is on the lower end of the prices.